Product ID:ROSIN FLUX CORED SOLDER WIRE
MSDS Date:04/11/1990
FSC:3439
NIIN:00-824-9856
MSDS Number: BKKJZ

FEDERATED-FRY METALS INC DIV OF COOKSON AMERICA

6TH AVE AND 41ST ST
ALTOONA, PA 16602
US

Emergency Phone: 814-946-1611/CHEMTREC 800-424-9300

Info Phone: 814-946-1611/CHEMTREC 800-424-9300

Cage: 65172

FRY TECHNOLOGY DIV OF COOKSON AMERICA INC

ALTOONA, PA 16602 US

Telephone: 814-946-1611

Cage: 65172

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

BISMUTH-PRODUCT CONTAINS ONE OR MORE OF THESE METALS.

CAS: 7440-69-9

RTECS: EB2600000

INDIUM

CAS: 7440-74-6

RTECS: NL1050000

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 1 - 4%

LD50 LC50 Mixture:ORAL LD50 (RAT) IS > 5000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYE:IRRITATION.SKIN:MOLTEN
SOLDER CAN CAUSE BURNS.FUMES MAY CAUSE IRRITATION.INHALATION:ROSIN
FUMES CAN CAUSE RESPIRATORY TRACT
IRRITATION,DIZZINESS,HEADACHE.INGESTION:LEAD IS TOXIC.MAY CAUSE AN
EMIA,STOMACH PAIN.TIN CAN CAUSE FEVER &DIARRHEA.ANTIMONY IS TOXIC &
CAN CAUSE NASAL ULCERATION.CHRONIC-NOT GIVEN.
Effects of Overexposure:SEE HEALTH HAZARDS SECTION. HEALTH HAZARD DATA
APPLIES ONLY IF THE ELEMENT (I.E. SILVER, ANTIMONY, ETC.) IS IN
CONCENTRATION ABOVE TRACE LEVELS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:GET MEDICAL CARE.EYES:FLUSH WITH WATER FOR 15
MINUTES.SKIN:FOR BURNS,COOL WITH COLD WATER.INHALATION:REMOVE TO
FRESH AIR.GIVE OXYGEN IF NEEDED.INGESTION:GET MEDICAL HELP
IMMEDIATELY.

Flash Point:NONE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:LEAD EMITS TOXIC FUMES.

Spill Release Procedures:IF MOLTEN, ALLOW TO COOL AND SOLIDIFY THEN
SCRAPE UP.

Handling and Storage Precautions:STORAGE-NO SPECIAL REQUIREMENTS.
Other Precautions:LEAD WARNING LABELS. KEEP OUT OF REACH OF CHILDREN.
FOR INDUSTRIAL USE ONLY. DO NOT TAKE INTERNALLY.

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED.USE
NIOSH APPROVED RESPIRATOR FOR EITHER ORGANIC VAPORS,DUST/FUME (HIGH
EFFICIENCY FILTERS) OR BOTH IF TLVS ARE EXCEEDED.
Ventilation:LOCAL DUST PICK UP AND VENTILATION RECOMMENDED.
Protective Gloves:NOT USUALLY NECESSARY
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:NO FOOD,DRINK/TOBACCO SHOULD BE ALLOWED WHERE
CORE SOLDER IS USED.WASH HANDS THOROUGHLY AFTER HANDLING & BEFORE
EATING.
Supplemental Safety and Health

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:DEPENDS
Solubility in Water:NIL
Appearance and Odor:SILVER GREY WIRE - NO ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND STRONG ACIDS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES MAY CONTAIN FORMALDEHYDE, CARBON
MONOXIDE, ROSIN AND ROSIN DERIVATIVES

Waste Disposal Methods:RETURN FOR REPROCESSING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.